How to Paint Your Walls With a Paint Sprayer
Paint sprayer or roller? It is indeed a tough decision to make when it comes to wall painting. Both have their own benefits as well as drawbacks.
In today’s article, I will help you have a better understanding of paint sprayers as well as how to paint your walls with a paint sprayer. I hope this article would be a useful reference for you, and after this, you will make the best decision on choosing the right tool for you home.
When to Use a Paint Sprayer
People love using paint sprayers for a reason. They are fast. They are convenient. Why hiring a contractor when you can get the work done at ease by yourself?
If your walls meet these conditions, consider using a paint sprayer:
- It’s better to use a paint sprayer than a roller or a brush when you want to give your walls a good priming base. When the wall is still in the early phase of being built, or you want to repaint the room, you will need a good priming base to make sure the paint layer can be applied smoothly later.
- It’d also be wise to choose a paint sprayer when you want to paint the exterior with a clear perimeter. Exterior surfaces can be decking, garages, or anything else that will not be painted significantly. These surfaces will slow down the process of painting, thus using a paint sprayer will help avoid that.
- If there are too many detail and complex textures that need to be painted, using a paint sprayer is highly recommended. They will give the surface a nice and thin coat of paint as they are able to get into even the narrowest crevices. A roller or brush will not work as good, which will cause pooled up or dripping.
How to Paint with a Paint Sprayer
Even though it might look easy, the process of using a paint sprayer to paint your walls is not that simple. You can’t just hook it up and start painting.
There are things you need to prepare before starting to paint:
- Make sure the surface is clean and smooth for the paint to go even. Remove tripping hazards that might result in snagging the sprayer hose.
- Mask off or cover nearby surfaces that might get infected like windows, or floors with drop cloths.
Now that everything is well-prepared, follow these steps to have a nice and even painting coat for your walls!
- Step 1: Move the sprayer in long and nice strokes before you actually start spraying. Sprayers usually apply paint fast, so you need to make sure to get an even coat that doesn’t run or drip.
- Step 2: Try to hold the paint gun nozzle perpendicular to the surface you’re painting, and about 10-12 inches away. Even the smallest change can result in an uneven application. Titling the sprayer upward or downward will cause the same thing.
People tend to swing the sprayer in a curve shape after a while, which once again results in uneven application.
- Step 3: Duplicate each pass half the width of the spraying area to avoid stripes or uneven light/dark areas.
- Step 4: Start with the corners and protrusion areas first before moving to large, flat areas. You can get the corners done nicely by directly spraying with a vertical stroke on them.
Tips: move faster than usual, particularly on outside corners, to prevent overdoing the edges.
- Step 5: After you’re done, step back and look for areas that were missed or unevenly painted. A roller or brush will come in handy in such a situation when all you need is a little touch-up.
Tips and Tricks
Check out these tips and see if you can apply any of them when using a paint sprayer.
- Try practicing and mastering your technique on cardboards before actual paint on your walls. You wouldn’t want to mess up and sacrifice your beautiful wall, would you?!
- Don’t paint when the outside temperature is below 45°F or above 75°F. Paint under direct sunlight will make the paint dry too fast. If it’s too cold, the paint will most likely dry slower than usual, which attracts bugs and insects. Your paint gun will also have a higher chance of clogging.
- Stir and strain your paint often to avoid clogging. Clogging is the #1 problem that people hate when it comes to painting with a paint sprayer.
- Avoid build-ups by using a rag to wipe the tip guards.
Safety Reminder
You will find a tip guard in most sprayers, which is used to protect you from injecting paints to your body. If you accidentally got paint on any part of your body, seek medical help as soon as possible.
Even if it doesn’t look that bad, trust me, it does. Get it checked for your own sake because most paints contain hazardous toxins.
My Final Verdict
Above are the essential things you need to know when choosing a paint sprayer to paint your walls. Painting with a sprayer or roller seems to be the same, but the two are still different in many aspects.
I hope my article gave you a better understanding of paint sprayers, as well as how to paint your walls with a paint sprayer. For more information, please check out https://gopaintsprayer.com website.
If you have any questions, comment down below, and I will answer them all. Also, if you think any part of this article needs adding or editing, let me know too!
Thank you for reading!